1. Home
  2. /
  3. Avionic/instruments
  4. /
  5. Instruments
  6. /
  7. Other
  8. /
  9. G-meter LXNAV

G-meter LXNAV

518.75618.75 Ex. Tax: 415.00495.00
SKU: N/A
Clear
    Reset options
    Calibration chart *
    • 60 €

Intuitive standalone digital G-meter with built-in Flight recorder!

Standalone G-meter indicates and logs g-forces with an integrated high precision digital pressure sensor and inertial platform. The unit has standard dimension of 57 mm (or 80 mm) diameter.

3 Push Buttons -SD Card

Used for a simplified handling during the flight or ground operations. Micro SD card for data exchange (SW update and Flight downloads).

INERTIAL PLATFORM – LIMITS

Inertial platform with +-8g accelerometer. Device is showing current g-load in navbox/needle and it’s min-max values in bar. Last flight min/max load navboxes are persistent till next flight. Min/Max limits with Warning zones can be defined.

DISPLAY

Real Time Data is displayed on a QVGA 320×240 pixel 2.5-inch (57 mm)(3.5-inch-80 mm)high brightness colour display.

LOGBOOK

The logbook menu displays the list of flights. If the RTC time is set properly the take-off and landing time shown will be correct. Each flight item consists of the maximum positive g-load, the maximum negative g-load from the flight and the maximum IAS. This function is available only with “FR” version.

Specification

Size And Weight

Height: 61 mm (57mm)  : 81 mm (80 mm)

Width: 61 mm (57mm)  : 81 mm (80 mm)

Depth: 48 mm (57mm)  : 53 mm (80 mm)

Weight: ~200 g (57mm)  : 270 g (80 mm)

Built-in RTC (Real time clock)

Unlimited storage for flights (+28000 hours at 1 sec interval)

Flights stored in IGC file format are downloadable on SD card

Chip ARM Cortex-M4 160MHz

Display

2.5-inch (57 mm) sunlight readable (3.5-inch-80 mm)

16 bit color display

1200 cd brightness

320-pixel-by-240-pixel resolution

ALS – ambient light sensor

Sensors

High resolution airspeed sensor

Inertial platform 3 axis accelerometer (+-8g) and 3 axis gyroscope

Connections

Serial port input/output on RS232 level (standard IGC 6 pin connector RJ11)

Micro SD card

Buttons

3 x Push buttons

Storage

2 GBytes of internal memory

Integrated SD card reader

Consumption

At 12V (power input 8-32V)

90 mA – 140 mA

Material

Aluminum housing

You may also like

Rotax oil filter
Multi Probe MNIC/UN
Menu
Select your currency
EUREuro