Note: Facet fuel pumps are not FAA approved and are not intended for aircraft use.
These pumps measure less than 3″ in any direction and weigh only 18 oz. Fuel is supplied as soon as the ignition is turned on so the engine will start faster at colder temps. Built-in pressure relief prevents flooding and assures fast re-starts on hottest days. The all-steel plated case is water tight. Mounts with two bolts. For best results, mount the pump close to the fuel tank and below the liquid level.
The tank is self-priming to 12″ to 36″ Lift min dry. Standard 12 V models require only 1 amp at max. delivery. Many models are available, but these are the ones recommended by Rutan Aircraft Factory, Stoddard Hamilton and many other aircraft designers. All of the pumps shown feature the all nylon valve and plunger as specified by Rutan Aircraft in the Canard Pusher newsletter.
- 12 Volt
- PSI max 4.5 – min 3.0
- GPH 30
- Fitting size 1/8 – 27 INT
- Lift min. dry: 12″
- Check valve N
- Positive shut-off valve N
- Facet solid state
